From 98267d33e2da8cd386212856a22f4a64b32834ab Mon Sep 17 00:00:00 2001 From: Andrew Jackson Date: Fri, 7 Nov 2014 14:14:23 +0000 Subject: [PATCH] serial: pl011: Add device tree support for RX DMA polling Add equivalent attributes to those provided in the platform data for use when RX DMA is enabled. Signed-off-by: Andrew Jackson Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/pl011.txt | 19 ++++++++++------ drivers/tty/serial/amba-pl011.c | 22 ++++++++++++++++--- 2 files changed, 31 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt index 5d2e840ae65c..0e05340055e1 100644 --- a/Documentation/devicetree/bindings/serial/pl011.txt +++ b/Documentation/devicetree/bindings/serial/pl011.txt @@ -6,12 +6,17 @@ Required properties: - interrupts: exactly one interrupt specifier Optional properties: -- pinctrl: When present, must have one state named "sleep" - and one state named "default" -- clocks: When present, must refer to exactly one clock named - "apb_pclk" -- dmas: When present, may have one or two dma channels. - The first one must be named "rx", the second one - must be named "tx". +- pinctrl: When present, must have one state named "sleep" + and one state named "default" +- clocks: When present, must refer to exactly one clock named + "apb_pclk" +- dmas: When present, may have one or two dma channels. + The first one must be named "rx", the second one + must be named "tx". +- auto-poll: Enables polling when using RX DMA. +- poll-rate-ms: Rate at which poll occurs when auto-poll is set, + default 100ms. +- poll-timeout-ms: Poll timeout when auto-poll is set, default + 3000ms. See also bindings/arm/primecell.txt diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d984a97043b3..8d94c194f090 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -341,6 +341,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; + uap->dmarx.auto_poll_rate = false; if (plat && plat->dma_rx_poll_enable) { /* Set poll rate if specified. */ if (plat->dma_rx_poll_rate) { @@ -361,9 +362,24 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * plat->dma_rx_poll_timeout; else uap->dmarx.poll_timeout = 3000; - } else - uap->dmarx.auto_poll_rate = false; - + } else if (!plat && dev->of_node) { + uap->dmarx.auto_poll_rate = of_property_read_bool( + dev->of_node, "auto-poll"); + if (uap->dmarx.auto_poll_rate) { + u32 x; + + if (0 == of_property_read_u32(dev->of_node, + "poll-rate-ms", &x)) + uap->dmarx.poll_rate = x; + else + uap->dmarx.poll_rate = 100; + if (0 == of_property_read_u32(dev->of_node, + "poll-timeout-ms", &x)) + uap->dmarx.poll_timeout = x; + else + uap->dmarx.poll_timeout = 3000; + } + } dev_info(uap->port.dev, "DMA channel RX %s\n", dma_chan_name(uap->dmarx.chan)); } -- 2.45.2