From 9d009d9c20624cd8ed2a3ae0e43752c4a34b4893 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 22 Mar 2019 10:58:06 +0200 Subject: [PATCH] phy: ti-pipe3: Fix SATA & USB PHY power up sequence As per "Table 26-7. SATA PHY Subsystem Low-Level Programming Sequence" in TRM [1] we need to turn on SATA_PHY_TX before SATA_PHY_RX. [1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/ti/phy-ti-pipe3.c | 44 ++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 14 deletions(-) diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c index c596e27bae65..aa5eab478039 100644 --- a/drivers/phy/ti/phy-ti-pipe3.c +++ b/drivers/phy/ti/phy-ti-pipe3.c @@ -56,14 +56,14 @@ #define SATA_PLL_SOFT_RESET BIT(18) -#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14) #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 -#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22) #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22 -#define PIPE3_PHY_TX_RX_POWERON 0x3 -#define PIPE3_PHY_TX_RX_POWEROFF 0x0 +#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) +#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) #define PCIE_PCS_MASK 0xFF0000 #define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 @@ -328,7 +328,6 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); static int ti_pipe3_power_off(struct phy *x) { - u32 val; int ret; struct ti_pipe3 *phy = phy_get_drvdata(x); @@ -337,10 +336,8 @@ static int ti_pipe3_power_off(struct phy *x) return 0; } - val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, - PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val); + PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0); return ret; } @@ -351,6 +348,7 @@ static int ti_pipe3_power_on(struct phy *x) int ret; unsigned long rate; struct ti_pipe3 *phy = phy_get_drvdata(x); + bool rx_pending = false; if (!phy->phy_power_syscon) { omap_control_phy_power(phy->control_dev, 1); @@ -363,14 +361,32 @@ static int ti_pipe3_power_on(struct phy *x) return -EINVAL; } rate = rate / 1000000; - mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; - val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; - + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; + val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, mask, val); - return ret; + /* + * For PCIe, TX and RX must be powered on simultaneously. + * For USB and SATA, TX must be powered on before RX + */ + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) { + val = PIPE3_PHY_TX_POWERON; + rx_pending = true; + } else { + val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; + } + + regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + mask, val); + + if (rx_pending) { + val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; + regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + mask, val); + } + + return 0; } static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) -- 2.45.2