From a211b8c55f3ce54423bd1daf1bca82271b08ac2f Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Mon, 18 Jun 2018 11:15:44 +0300 Subject: [PATCH] ARM: dts: imx6qdl-sabreauto: Add sensors The following sensors are on I2C3 on the baseboard: * isil,isl29023 light sensor * fsl,mag3110 magnetometer * fsl,mma8451 accelerometer Added under i2cmux/i2c@1 because they're not otherwise accessible. These are all supported by iio with following configs: * CONFIG_SENSORS_ISL29018 * CONFIG_MAG3110 * CONFIG_MMA8452 Tested with raw reads from iio sysfs. Signed-off-by: Leonard Crestez Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 0e28e36ddbb2..a59a0fd1eb02 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -155,6 +155,27 @@ max7310_c: gpio@34 { gpio-controller; #gpio-cells = <2>; }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; + + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; -- 2.45.2