From a3470c1829c0c856a19c10af58f8e7792ae27d7a Mon Sep 17 00:00:00 2001 From: Alexandru Ardelean Date: Wed, 23 Oct 2019 10:00:46 +0300 Subject: [PATCH] spi: document CS setup, hold & inactive times in header This change documents the CS setup, host & inactive times. They were omitted when the fields were added, and were caught by one of the build bots. Fixes: 25093bdeb6bc ("spi: implement SW control for CS times") Reported-by: kbuild test robot Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20191023070046.12478-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c40d6af2bf07..98fe8663033a 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -407,6 +407,11 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * controller has native support for memory like operations. * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller + * @cs_setup: delay to be introduced by the controller after CS is asserted + * @cs_hold: delay to be introduced by the controller before CS is deasserted + * @cs_inactive: delay to be introduced by the controller after CS is + * deasserted. If @cs_change_delay is used from @spi_transfer, then the + * two delays will be added up. * @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per * CS number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods -- 2.45.2