From b84e773119e1401e6ebd8906fb0b2a43bbe64871 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 30 Jun 2011 12:39:12 -0600 Subject: [PATCH] tty/serial: change of_serial to use new of_property_read_u32() api Simplifies the code a bit and drops a few lines. Signed-off-by: Grant Likely Acked-by: Arnd Bergmann --- drivers/tty/serial/of_serial.c | 37 ++++++++++++++-------------------- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 36038ed8f09a..dbfbfda27537 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -32,17 +32,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, { struct resource resource; struct device_node *np = ofdev->dev.of_node; - const __be32 *clk, *spd; - const __be32 *prop; - int ret, prop_size; + u32 clk, spd, prop; + int ret; memset(port, 0, sizeof *port); - spd = of_get_property(np, "current-speed", NULL); - clk = of_get_property(np, "clock-frequency", NULL); - if (!clk) { + if (of_property_read_u32(np, "clock-frequency", &clk)) { dev_warn(&ofdev->dev, "no clock-frequency property set\n"); return -ENODEV; } + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &spd) == 0) + port->custom_divisor = clk / (16 * spd); ret = of_address_to_resource(np, 0, &resource); if (ret) { @@ -54,20 +54,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, port->mapbase = resource.start; /* Check for shifted address mapping */ - prop = of_get_property(np, "reg-offset", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->mapbase += be32_to_cpup(prop); + if (of_property_read_u32(np, "reg-offset", &prop) == 0) + port->mapbase += prop; /* Check for registers offset within the devices address range */ - prop = of_get_property(np, "reg-shift", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->regshift = be32_to_cpup(prop); + if (of_property_read_u32(np, "reg-shift", &prop) == 0) + port->regshift = prop; port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; - prop = of_get_property(np, "reg-io-width", &prop_size); - if (prop && (prop_size == sizeof(u32))) { - switch (be32_to_cpup(prop)) { + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { + switch (prop) { case 1: port->iotype = UPIO_MEM; break; @@ -75,21 +72,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, port->iotype = UPIO_MEM32; break; default: - dev_warn(&ofdev->dev, - "unsupported io width (%d bytes)\n", - be32_to_cpup(prop)); + dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", + prop); return -EINVAL; } } port->type = type; - port->uartclk = be32_to_cpup(clk); + port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; port->dev = &ofdev->dev; - /* If current-speed was set, then try not to change it. */ - if (spd) - port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); return 0; } -- 2.45.2