From b8f8c8eb408b36ad55dd41a616b3f51998880fb6 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 21 Jul 2018 15:48:47 +0200 Subject: [PATCH] net: phy: add GBit master / slave error detection Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 8 ++++++++ include/uapi/linux/mii.h | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index b9f5f40a7ac1..db1172db1e7c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1555,6 +1555,14 @@ int genphy_read_status(struct phy_device *phydev) if (adv < 0) return adv; + if (lpagb & LPA_1000MSFAIL) { + if (adv & CTL1000_ENABLE_MASTER) + phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); + else + phydev_err(phydev, "Master/Slave resolution failed\n"); + return -ENOLINK; + } + phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb); common_adv_gb = lpagb & adv << 2; diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h index b5c2fdcf23fd..a506216591d6 100644 --- a/include/uapi/linux/mii.h +++ b/include/uapi/linux/mii.h @@ -136,6 +136,7 @@ #define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ +#define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */ #define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ #define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ #define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -- 2.45.2