From b99c859b8fc3db534c7ef7700c1627d0e3df4dbe Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 4 May 2016 12:47:10 -0700 Subject: [PATCH] staging: comedi: dt2811: tidy up A/D Gain/Channel register defines Cleanup the defines for this register and its bits and remove the redundant information in the comment. Make the (*insn_read) use the range to set the gain bits correctly. Currently the gain is always set to 1. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt2811.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index 433cfd136046..f72d6c8001ed 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -63,6 +63,10 @@ /* continuous conversion, external clock, external trigger */ #define DT2811_ADCSR_ADMODE_EXT DT2811_ADCSR_ADMODE(3) +#define DT2811_ADGCR_REG 0x01 /* r/w A/D Gain/Channel */ +#define DT2811_ADGCR_GAIN(x) (((x) & 0x3) << 6) +#define DT2811_ADGCR_CHAN(x) (((x) & 0xf) << 0) + static const struct comedi_lrange range_dt2811_pgh_ai_5_unipolar = { 4, { UNI_RANGE(5), @@ -119,16 +123,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { /* - 0x01 ADGCR R/W A/D Gain/Channel Register - bit 6,7 - (R/W) gain select - 00 gain=1, both PGH, PGL models - 01 gain=2 PGH, 10 PGL - 10 gain=4 PGH, 100 PGL - 11 gain=8 PGH, 500 PGL - bit 4,5 - reserved - bit 3-0 - (R/W) channel select - channel number from 0-15 - 0x02,0x03 (R) ADDAT A/D Data Register (W) DADAT0 D/A Data Register 0 0x02 low byte @@ -166,7 +160,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = { #define TIMEOUT 10000 -#define DT2811_ADGCR 1 #define DT2811_ADDATLO 2 #define DT2811_ADDATHI 3 #define DT2811_DADAT0LO 2 @@ -219,12 +212,15 @@ static int dt2811_ai_eoc(struct comedi_device *dev, static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { - int chan = CR_CHAN(insn->chanspec); + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int range = CR_RANGE(insn->chanspec); int ret; int i; for (i = 0; i < insn->n; i++) { - outb(chan, dev->iobase + DT2811_ADGCR); + /* select channel/gain and trigger conversion */ + outb(DT2811_ADGCR_CHAN(chan) | DT2811_ADGCR_GAIN(range), + dev->iobase + DT2811_ADGCR_REG); ret = comedi_timeout(dev, s, insn, dt2811_ai_eoc, 0); if (ret) -- 2.45.2