From bbe8ff5e25afd4d06c8a8bad009aca5f0d0c22ef Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sun, 21 Aug 2011 23:45:40 +0800 Subject: [PATCH] ASoC: mxs-saif: clear clk gate first before register setting Saif needs clear clk gate first before writing registers or the write will not success. The original xx_get_mclk function clear clk gate after mclk setting that may cause the former mclk setting unwork, then the real output mclk maybe inaccurate. Placing the clear before setting mclk to avoid such an issue. We also have to clear clk gate in startup instead of in prepare function. Signed-off-by: Dong Aisheng Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 0b3adaec9f4c..530017f7d14a 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -187,16 +187,20 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, if (!saif) return -EINVAL; + /* Clear Reset */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* FIXME: need clear clk gate for register r/w */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + stat = __raw_readl(saif->base + SAIF_STAT); if (stat & BM_SAIF_STAT_BUSY) { dev_err(saif->dev, "error: busy\n"); return -EBUSY; } - /* Clear Reset */ - __raw_writel(BM_SAIF_CTRL_SFTRST, - saif->base + SAIF_CTRL + MXS_CLR_ADDR); - saif->mclk_in_use = 1; ret = mxs_saif_set_clk(saif, mclk, rate); if (ret) @@ -207,8 +211,6 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, return ret; /* enable MCLK output */ - __raw_writel(BM_SAIF_CTRL_CLKGATE, - saif->base + SAIF_CTRL + MXS_CLR_ADDR); __raw_writel(BM_SAIF_CTRL_RUN, saif->base + SAIF_CTRL + MXS_SET_ADDR); @@ -303,6 +305,10 @@ static int mxs_saif_startup(struct snd_pcm_substream *substream, __raw_writel(BM_SAIF_CTRL_SFTRST, saif->base + SAIF_CTRL + MXS_CLR_ADDR); + /* clear clock gate */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + return 0; } @@ -379,10 +385,6 @@ static int mxs_saif_prepare(struct snd_pcm_substream *substream, { struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); - /* clear clock gate */ - __raw_writel(BM_SAIF_CTRL_CLKGATE, - saif->base + SAIF_CTRL + MXS_CLR_ADDR); - /* enable FIFO error irqs */ __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN, saif->base + SAIF_CTRL + MXS_SET_ADDR); -- 2.45.2