From c8e75cd490771ebfcfda29b1be27730b114cb0e7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 31 May 2018 09:50:10 +0200 Subject: [PATCH] arm64: zynqmp: Setup default number of chipselects for zcu100 There is only one chipselect on each connector. Define it directly in board dts file. There should be an option to use more chipselects via gpios. Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 2b3757dd74cc..a109e82982ae 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -250,11 +250,13 @@ wlcore: wifi@2 { &spi0 { /* Low Speed connector */ status = "okay"; label = "LS-SPI0"; + num-cs = <1>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; + num-cs = <1>; }; &uart0 { -- 2.45.2