From d4740560bc0318ae8fcbfb752ee9e3aefca7dc3f Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 15 Mar 2018 12:55:42 +0100 Subject: [PATCH] dt-bindings: clock: meson: update documentation with hhi syscon The HHI register region hosts more than just clocks and needs to accessed drivers other than the clock controller, such as the display driver. This register region should be managed by syscon. It is already the case on gxbb/gxl and it soon will be on axg. The clock controllers must use this system controller instead of directly mapping the registers. This changes the bindings of gxbb and axg's clock controllers. This is due to an initial 'incomplete' knowledge of these SoCs, which is why the meson bindings are unstable ATM. Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../bindings/clock/amlogic,gxbb-clkc.txt | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index e2b377ed6f91..e950599566a9 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -10,9 +10,6 @@ Required Properties: "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. -- reg: physical base address of the clock controller and length of memory - mapped region. - - #clock-cells: should be 1. Each clock is assigned an identifier and client nodes can use this identifier @@ -20,13 +17,22 @@ to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be used in device tree sources. +Parent node should have the following properties : +- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or + "amlogic,meson-axg-hhi-sysctrl" +- reg: base address and size of the HHI system control register space. + Example: Clock controller node: - clkc: clock-controller@c883c000 { +sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { #clock-cells = <1>; compatible = "amlogic,gxbb-clkc"; - reg = <0x0 0xc883c000 0x0 0x3db>; }; +}; Example: UART controller node that consumes the clock generated by the clock controller: -- 2.45.2