From da3ac208f88af4302ca36e0d4bf6e621aa557e71 Mon Sep 17 00:00:00 2001 From: Ralph Sennhauser Date: Sun, 21 May 2017 14:48:55 +0200 Subject: [PATCH] ARM: dts: armada-385-linksys: usb3 label cleanup Now that we use the reference for the USB3.0 port update the node name and labels for the phy and vbus to match the label used by armada-38x.dtsi. Signed-off-by: Ralph Sennhauser Signed-off-by: Imre Kaloz Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-linksys.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 932fca4d64c3..6cc1ec7699ff 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -63,16 +63,16 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; }; - usb3_phy: usb3_phy { + usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <®_xhci0_vbus>; + vcc-supply = <&usb3_1_vbus>; }; - reg_xhci0_vbus: xhci0-vbus { + usb3_1_vbus: usb3_1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-name = "xhci0-vbus"; + pinctrl-0 = <&usb3_1_vbus_pins>; + regulator-name = "usb3_1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -371,7 +371,7 @@ sata_led_pin: sata-led-pin { marvell,function = "gpio"; }; - xhci0_vbus_pins: xhci0-vbus-pins { + usb3_1_vbus_pins: usb3_1-vbus-pins { marvell,pins = "mpp50"; marvell,function = "gpio"; }; @@ -393,5 +393,5 @@ &usb0 { &usb3_1 { status = "okay"; - usb-phy = <&usb3_phy>; + usb-phy = <&usb3_1_phy>; }; -- 2.45.2