From f1b3b7077b40b4890c5efed82f5b06854fed4811 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 19 Sep 2019 10:58:21 +0530 Subject: [PATCH] arm64: dts: rockchip: Rename vcc12v_sys into dc_12v for roc-rk3399-pc It is always better practice to follow regulator naming conventions as per the schematics for future references. This would indeed helpful to review and check the naming convention directly on schematics, both for the code reviewers and the developers. So, rename vcc12v_sys into dc_12v as per rk3399 power tree as per roc-rk3399-pc schematics. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20190919052822.10403-6-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index 19f7732d728c..603c4d7274b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -57,9 +57,9 @@ vcc_vbus_typec0: vcc-vbus-typec0 { * should be placed inside mp8859, but not until mp8859 has * its own dt-binding. */ - vcc12v_sys: mp8859-dcdc1 { + dc_12v: mp8859-dcdc1 { compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; + regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; @@ -85,7 +85,7 @@ vcc3v3_sys: vcc3v3-sys { regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&dc_12v>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -118,7 +118,7 @@ vcc_sys: vcc-sys { regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&dc_12v>; }; vdd_log: vdd-log { -- 2.45.2