From f225951dbb9d02c80d09cb81b070b3af73a68de9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 8 Oct 2016 20:15:27 +0200 Subject: [PATCH] iio: accel: Add driver for the MiraMEMS DA280 3-axis 14-bit digital accelerometer Add an iio driver for the MiraMEMS DA280 3-axis 14-bit accelerometer, as well as for the DA226 which is a fully compatible 2-axis version. Datasheets for the DA280 and DA226 can be found at the manufacturers site: http://www.miramems.com/en/products.asp?list=1 Signed-off-by: Hans de Goede Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../bindings/i2c/trivial-devices.txt | 2 + drivers/iio/accel/Kconfig | 10 + drivers/iio/accel/Makefile | 1 + drivers/iio/accel/da280.c | 183 ++++++++++++++++++ 4 files changed, 196 insertions(+) create mode 100644 drivers/iio/accel/da280.c diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index decdd3e636bf..307f13bc81f2 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -125,6 +125,8 @@ microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) +miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer +miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer national,lm63 Temperature sensor with integrated fan control national,lm75 I2C TEMP SENSOR diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 8945e70a797c..878e3c9449de 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -52,6 +52,16 @@ config BMC150_ACCEL_SPI tristate select REGMAP_SPI +config DA280 + tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver" + depends on I2C + help + Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit + digital accelerometer. + + To compile this driver as a module, choose M here: the + module will be called da280. + config DA311 tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver" depends on I2C diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index ade13ae5d056..0aa574957047 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_BMA220) += bma220_spi.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o +obj-$(CONFIG_DA280) += da280.o obj-$(CONFIG_DA311) += da311.o obj-$(CONFIG_DMARD06) += dmard06.o obj-$(CONFIG_DMARD09) += dmard09.o diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c new file mode 100644 index 000000000000..ed8343aeac9c --- /dev/null +++ b/drivers/iio/accel/da280.c @@ -0,0 +1,183 @@ +/** + * IIO driver for the MiraMEMS DA280 3-axis accelerometer and + * IIO driver for the MiraMEMS DA226 2-axis accelerometer + * + * Copyright (c) 2016 Hans de Goede + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#define DA280_REG_CHIP_ID 0x01 +#define DA280_REG_ACC_X_LSB 0x02 +#define DA280_REG_ACC_Y_LSB 0x04 +#define DA280_REG_ACC_Z_LSB 0x06 +#define DA280_REG_MODE_BW 0x11 + +#define DA280_CHIP_ID 0x13 +#define DA280_MODE_ENABLE 0x1e +#define DA280_MODE_DISABLE 0x9e + +enum { da226, da280 }; + +/* + * a value of + or -4096 corresponds to + or - 1G + * scale = 9.81 / 4096 = 0.002395019 + */ + +static const int da280_nscale = 2395019; + +#define DA280_CHANNEL(reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec da280_channels[] = { + DA280_CHANNEL(DA280_REG_ACC_X_LSB, X), + DA280_CHANNEL(DA280_REG_ACC_Y_LSB, Y), + DA280_CHANNEL(DA280_REG_ACC_Z_LSB, Z), +}; + +struct da280_data { + struct i2c_client *client; +}; + +static int da280_enable(struct i2c_client *client, bool enable) +{ + u8 data = enable ? DA280_MODE_ENABLE : DA280_MODE_DISABLE; + + return i2c_smbus_write_byte_data(client, DA280_REG_MODE_BW, data); +} + +static int da280_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct da280_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = i2c_smbus_read_word_data(data->client, chan->address); + if (ret < 0) + return ret; + /* + * Values are 14 bits, stored as 16 bits with the 2 + * least significant bits always 0. + */ + *val = (short)ret >> 2; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = da280_nscale; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static const struct iio_info da280_info = { + .driver_module = THIS_MODULE, + .read_raw = da280_read_raw, +}; + +static int da280_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct da280_data *data; + + ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID); + if (ret != DA280_CHIP_ID) + return (ret < 0) ? ret : -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + i2c_set_clientdata(client, indio_dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &da280_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = da280_channels; + if (id->driver_data == da226) { + indio_dev->name = "da226"; + indio_dev->num_channels = 2; + } else { + indio_dev->name = "da280"; + indio_dev->num_channels = 3; + } + + ret = da280_enable(client, true); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "device_register failed\n"); + da280_enable(client, false); + } + + return ret; +} + +static int da280_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + + return da280_enable(client, false); +} + +#ifdef CONFIG_PM_SLEEP +static int da280_suspend(struct device *dev) +{ + return da280_enable(to_i2c_client(dev), false); +} + +static int da280_resume(struct device *dev) +{ + return da280_enable(to_i2c_client(dev), true); +} +#endif + +static SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume); + +static const struct i2c_device_id da280_i2c_id[] = { + { "da226", da226 }, + { "da280", da280 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, da280_i2c_id); + +static struct i2c_driver da280_driver = { + .driver = { + .name = "da280", + .pm = &da280_pm_ops, + }, + .probe = da280_probe, + .remove = da280_remove, + .id_table = da280_i2c_id, +}; + +module_i2c_driver(da280_driver); + +MODULE_AUTHOR("Hans de Goede "); +MODULE_DESCRIPTION("MiraMEMS DA280 3-Axis Accelerometer driver"); +MODULE_LICENSE("GPL v2"); -- 2.45.2