From fff37fdad9df3b214294ef83943d92aa9e1c7ecc Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Wed, 25 Jan 2017 17:36:24 +0530 Subject: [PATCH] net: thunderx: Leave serdes lane config on 81/83xx to firmware For DLMs and SLMs on 80/81/83xx, many lane configurations across different boards are coming up. Also kernel doesn't have any way to identify board type/info and since firmware does, just get rid of figuring out lane to serdes config and take whatever has been programmed by low level firmware. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- .../net/ethernet/cavium/thunder/thunder_bgx.c | 95 ++++--------------- 1 file changed, 18 insertions(+), 77 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 2f85b64f01fa..dfb2bad7ced5 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -894,17 +894,15 @@ static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid) struct device *dev = &bgx->pdev->dev; struct lmac *lmac; char str[20]; - u8 dlm; - if (lmacid > bgx->max_lmac) + if (!bgx->is_dlm && lmacid) return; lmac = &bgx->lmac[lmacid]; - dlm = (lmacid / 2) + (bgx->bgx_id * 2); if (!bgx->is_dlm) sprintf(str, "BGX%d QLM mode", bgx->bgx_id); else - sprintf(str, "BGX%d DLM%d mode", bgx->bgx_id, dlm); + sprintf(str, "BGX%d LMAC%d mode", bgx->bgx_id, lmacid); switch (lmac->lmac_type) { case BGX_MODE_SGMII: @@ -990,7 +988,6 @@ static void lmac_set_training(struct bgx *bgx, struct lmac *lmac, int lmacid) static void bgx_set_lmac_config(struct bgx *bgx, u8 idx) { struct lmac *lmac; - struct lmac *olmac; u64 cmr_cfg; u8 lmac_type; u8 lane_to_sds; @@ -1010,62 +1007,26 @@ static void bgx_set_lmac_config(struct bgx *bgx, u8 idx) return; } - /* On 81xx BGX can be split across 2 DLMs - * firmware programs lmac_type of LMAC0 and LMAC2 + /* For DLMs or SLMs on 80/81/83xx so many lane configurations + * are possible and vary across boards. Also Kernel doesn't have + * any way to identify board type/info and since firmware does, + * just take lmac type and serdes lane config as is. */ - if ((idx == 0) || (idx == 2)) { - cmr_cfg = bgx_reg_read(bgx, idx, BGX_CMRX_CFG); - lmac_type = (u8)((cmr_cfg >> 8) & 0x07); - lane_to_sds = (u8)(cmr_cfg & 0xFF); - /* Check if config is not reset value */ - if ((lmac_type == 0) && (lane_to_sds == 0xE4)) - lmac->lmac_type = BGX_MODE_INVALID; - else - lmac->lmac_type = lmac_type; - lmac_set_training(bgx, lmac, lmac->lmacid); - lmac_set_lane2sds(bgx, lmac); - - olmac = &bgx->lmac[idx + 1]; - /* Check if other LMAC on the same DLM is already configured by - * firmware, if so use the same config or else set as same, as - * that of LMAC 0/2. - * This check is needed as on 80xx only one lane of each of the - * DLM of BGX0 is used, so have to rely on firmware for - * distingushing 80xx from 81xx. - */ - cmr_cfg = bgx_reg_read(bgx, idx + 1, BGX_CMRX_CFG); - lmac_type = (u8)((cmr_cfg >> 8) & 0x07); - lane_to_sds = (u8)(cmr_cfg & 0xFF); - if ((lmac_type == 0) && (lane_to_sds == 0xE4)) { - olmac->lmac_type = lmac->lmac_type; - lmac_set_lane2sds(bgx, olmac); - } else { - olmac->lmac_type = lmac_type; - olmac->lane_to_sds = lane_to_sds; - } - lmac_set_training(bgx, olmac, olmac->lmacid); - } -} - -static bool is_dlm0_in_bgx_mode(struct bgx *bgx) -{ - struct lmac *lmac; - - if (!bgx->is_dlm) - return true; - - lmac = &bgx->lmac[0]; - if (lmac->lmac_type == BGX_MODE_INVALID) - return false; - - return true; + cmr_cfg = bgx_reg_read(bgx, idx, BGX_CMRX_CFG); + lmac_type = (u8)((cmr_cfg >> 8) & 0x07); + lane_to_sds = (u8)(cmr_cfg & 0xFF); + /* Check if config is reset value */ + if ((lmac_type == 0) && (lane_to_sds == 0xE4)) + lmac->lmac_type = BGX_MODE_INVALID; + else + lmac->lmac_type = lmac_type; + lmac->lane_to_sds = lane_to_sds; + lmac_set_training(bgx, lmac, lmac->lmacid); } static void bgx_get_qlm_mode(struct bgx *bgx) { struct lmac *lmac; - struct lmac *lmac01; - struct lmac *lmac23; u8 idx; /* Init all LMAC's type to invalid */ @@ -1081,29 +1042,9 @@ static void bgx_get_qlm_mode(struct bgx *bgx) if (bgx->lmac_count > bgx->max_lmac) bgx->lmac_count = bgx->max_lmac; - for (idx = 0; idx < bgx->max_lmac; idx++) - bgx_set_lmac_config(bgx, idx); - - if (!bgx->is_dlm || bgx->is_rgx) { - bgx_print_qlm_mode(bgx, 0); - return; - } - - if (bgx->lmac_count) { - bgx_print_qlm_mode(bgx, 0); - bgx_print_qlm_mode(bgx, 2); - } - - /* If DLM0 is not in BGX mode then LMAC0/1 have - * to be configured with serdes lanes of DLM1 - */ - if (is_dlm0_in_bgx_mode(bgx) || (bgx->lmac_count > 2)) - return; for (idx = 0; idx < bgx->lmac_count; idx++) { - lmac01 = &bgx->lmac[idx]; - lmac23 = &bgx->lmac[idx + 2]; - lmac01->lmac_type = lmac23->lmac_type; - lmac01->lane_to_sds = lmac23->lane_to_sds; + bgx_set_lmac_config(bgx, idx); + bgx_print_qlm_mode(bgx, idx); } } -- 2.45.2